Imaginarium Medieval Castle Instructions

The Imaginarium Medieval Castle is a children’s toy that requires assembly when purchased 1. The castle contains some moving parts to make a drawbridge, but most of the pieces are flat boards containing slots that slide together. Each piece is pre-cut and ready for assembly. No tools are required to assemble the castle.

Insert piece “S” into the slots on the back of castle wall “A.” Insert piece “T” into the slot on the back of castle wall “T.” Insert piece “U” into the slot on the back of castle wall “E.”

Align the grooves on the bottom of castle walls “B” and “C” with the grooves on the top of castle wall “E.” Push castle walls “B” and “C” down into the grooves to join all three walls together. Align the grooves on the bottom of castle walls “A” and “D” with the grooves on the top of castle walls “B” and “C.” Push castle walls “A” and “D” down into the grooves to join the walls together.

Insert castle wall “F” into the space between castle walls “D” and “E.” Place castle roof “G” on top of the opening between castle walls “D,” “E” and “F.” Insert castle tower “J” into the holes on castle roof “I.” Insert a dowel “d” into the holes on castle roof “I” that stick through to the bottom of castle roof “I.” Place the newly formed castle roof on top of the opening between castle walls “B,” “C” and “D.” Insert castle tower “K” into the holes on castle roof “H.” Insert a dowel “d” into the holes on castle roof “J” that stick through to the bottom of castle roof “H.” Place the newly formed castle roof on top of the opening between castle walls “A,” “B” and “C.”

Insert piece “V” into the slots aligned on walls “A” and “E.” Insert rod “F” into the hole on wall “A,” next to piece “V.” Insert the turning mechanism “B” into the same hole, through rod “F.” Do not fully insert the rod or mechanism. Slide drawbridge “R” onto turning mechanism “B” and rod “F.” Push turning mechanism “B” and rod “F” all the way through until the tip inserts into the hole on the opposite end of the drawbridge. Attach one end of the drawbridge strings “E” to the holes at the end of the drawbridge. Connect the other ends of the drawbridge strings to the holes on turning mechanism “B.”

Insert the three “Q” pieces into the slots on the drawbridge portion of hill “P.” Close the drawbridge on the hill. Extend the drawbridge on the castle. Align the top of the hill with the drawbridge on the castle. The gap between the two should be the same length as the drawbridge.

Attach pieces “M” and “L” to the windows on the tallest tower of the castle. Attach castle top “N” to the top of the same tower. Insert posts “C” into the holes on the top of castle top “N.” Attach castle roof “O” to the posts. Insert flag “a” into the hole on castle roof “O.”

Align the slots on piece “W” with the remaining slots on castle walls “B” and “C.” Push piece “W” into the slots. Attach ladder “X” to space between the corners of castle walls “A” and “D,” on the side opposite of the drawbridge and the hill. Attach ladders “Y” and “Z” to ladder “X.”

Place carts “G” and “H” on the outside of castle wall “A.”